Today is a special edition of One-Pic-A-Day where I present you with – four pictures. I do this to surprise and amaze you, not because I’m absorbed in my own project and am a detail fanatic about documenting every step. No, surely not that…

Little legs

You’ve seen a few pictures over the last several days where I was working on some boring-looking flat thing with a hole in it. Well, here’s the wrap on that whole deal, and I thought you might be curious. If not, skip on to tomorrow where there will likely be more pictures of…the same sort of thing. Good luck with that.

Anyway, above are the little legs I cut and bent that will go around the edge of the plate and hold up the guardrail that will keep the marbles corralled so they don’t go spilling all over the floor.

Blocked up

Here I have the plate flipped upside down and held securely in place with my nifty steel blocks. It helps to be positive that things aren’t going to move while you’re welding. I’m a little extreme sometimes, but at least I won’t worry. Maybe.

Woot!

Presto – we’re done! There was a lot more to it, but I apparently got really excited about how well it was going, and I didn’t shoot any pictures between adding the railing and adding the bolts and nut. Those fasteners that I welded in there will just help the marbles bang around a good bit and wander off in all sorts of unpredictable directions. Because of this bit of wackiness, the marbles will never go through the sculpture the same way twice! Unpredictability – I like it.

Don't move!

Yet again the nifty steel blocks prove their usefulness. Not only do they help hold that brace in place, but the sheer weight of the block is enough to allow me to use a rather heavy clamp to hold it upright. I’m not reassuring you that these blocks were a good thing to buy, I’m reassuring me, although if you agree, I’m cool with that.

So, now the randomizer/track splitter is all constructed and awaiting to have the brace welded to it that will attach it to the sculpture itself. Easy enough right? One would think so…